UL Online Certifications Directory
ZPMV2.E200612
Wiring, Printed - Component |
Wiring, Printed - Component
| Cond Width |
| | Max |
| | Max |
|
|
|
|---|
| | Min |
Cond |
| Area |
Solder |
Oper |
| Meets |
C |
|---|
| Min |
Edge |
Thk |
SS/ |
Diam |
Limits |
Temp |
Flame |
UL796 |
T |
|---|
| Type |
mm(in) |
mm(in) |
mic(mil) |
DS |
mm(in) |
C |
sec |
C |
Class |
DSR |
I |
|---|
Single layer printed wiring boards. |
| ALF |
0.127 (0.005) |
0.127 (0.005) |
16.5 (0.65) |
DS |
50.8 (2.0) |
275 |
10 |
120 |
V-0 |
All |
3 |
| FAST |
0.13 (0.005) |
0.38 (0.015) |
16.5 (0.65) |
DS |
12.7 (0.5) |
260 |
10 |
130 |
V-0 |
All |
3 |
Marking: Company name or trademark 
and type designation. May be followed by a suffix to denote factory identification.
ZPMV2.E200612
E200612
ZPMV2
224
215
NO
NO
Engineering Request
208
230
472510001
MIL
BasicUS
Listing
Active
listing
revised
YES
20090401
20090401
secure
text/sgml
AutoUpdt
AutoUpdt
216
217
218
219
221
222
NO
NO
Copyright © 2010 Underwriters Laboratories Inc.®
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "Copyright © 2010 Underwriters Laboratories Inc.®"
