UL Online Certifications Directory

ZPMV2.E100449
Wiring, Printed - Component

Page Bottom


Wiring, Printed - Component


See General Information for Wiring, Printed - Component

CHEMITALIC SUZHOU LTDE100449
UNIT 3, GENWAY READY BUILD FACTORY
SIP EXPORT PROCESSING ZONE, DISTRICT B
SUZHOU, JIANGSU 215021 CHINA
Cond Width Max Max
Min Cond Area Solder Oper Meets C
Min Edge Thk SS/ Diam Limits Temp Flame UL796 T
Type mm(in) mm(in) mic(mil) DS mm(in) C sec C Class DSR I

Multilayer (mass laminated) printed wiring boards.

10 0.25 (0.010) 0.51 (0.020) 16.5 (0.65) DS 177.8 (7.0) 260 10 105 V-0 -

Multilayer printed wiring boards.

12 0.13 (0.005) 0.13 (0.005) 17 (0.67) Int:33 DS 25.4 (1.0) 288 20 130 V-0 -
12A 0.13 (0.005) 0.39 (0.015) 17 (0.67) Int:105 DS 25.4 (1.0) 295 20 130 V-0 All -

Single layer printed wiring boards.

3 0.13 (0.005) 0.13 (0.005) 17 (0.67) DS 50.8 (2.0) 288 20 130 V-0 All -

Marking: Company name or trademark and type designation. May be followed by a suffix to denote factory identification.
Last Updated on 2009-11-04
ZPMV2.E100449 E100449 ZPMV2 224 215 NO NO Engineering Request No Activity 230 100533724 HRV BasicUS Listing Active listing revised YES 20091104 20091104 secure text/sgml AutoUpdt AutoUpdt 216 217 218 219 221 222 NO NO

Questions?

Print this page

Notice of Disclaimer

Page Top

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "Copyright © 2010 Underwriters Laboratories Inc.®"