UJTK.E212211
Visual-Signal Devices for Use in Hazardous Locations |
Visual-signal Appliances for Use in Hazardous Locations
Class I, Division 2, Groups A, B, C, and D; Class II, Division 1, Groups E, F and G; Class II, Division 2, Groups F and G; Class III, Divisions 1 and 2.
Cat. Nos. 107DV2PRINH*-N5, 107DV2PRIN*-R5, where * is A, B, C, G, M or R; Cat. No. 107DV2PST*- followed by N5, R5, EK or S1 and where * is A, B, C, G, M or R; Cat. No. 107DDV2PST*-G1, where * is A, B, C, G, M or R. For indoor or outdoor use, Type 3R and 4. Also Listed as a Marine Visual Signal Device.
.Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; Class III.
Strobe light subassemblies, Strobe base Lens
(Electronic/Optic) (Series 105), Model 105ST##-G1, -N5 or -R5, 105HIST##-EK, 105DHISTC, 105DHIST##-FJ, 105DHISTA-FJ, 105DHISTB-FJ, 105DHISTG-FJ, 105DHISTM-FJ, 105DHISTR-FJ, 105HIST##-N5 or -R5, 105FIN##-G1 or -N5, 105SIN##-G1 or -N5, 105FINH##-G1, -G5 or -N5, 105SINH##-G1, -G5 or -N5, where ## is A, B, C, G, M or R; Models 105FLED# or 105SLED#, where # is A, B, C, G or R, followed by -N5 or -G1.
LED, Model series 105 RGA, 105 RBA, 105I RGA, 105I RBA, followed by -N5 or -G1. Model 105XBRM#, where # is A, B, W, G or R, followed by -24D or -120A;
Model 105XBRIR#A, where # is B or G, followed by -24D or
-120A.
Rotating light, Model 58*-N5-100WH, where * is a letter signifying the lens color.
Strobe lights , Models 94DDV2*-G1, 94DV2*-N5, 96DV2*-N5, where *
is a letter signifying the lens color. For indoor or outdoor use.
Visual signal appliance subassemblies, private mode and general utility signaling, for use in hazardous locations.
Class I, Division 1, Groups C and D; Class I, Division 2, Groups A, B, C and D; Class II, Division 1 Groups E, F and G; Class II, Division 2, Groups F and G; Class III.
AdaptaBeacon strobe light subassemblies -
Strobe Enclosure Subassembly, synchronous type , Model 116DEG followed by EX; followed by -FJ; may be followed by R, when assembled with Listed Visual Signal Appliance subassemblies for Use in Hazardous Locations; mounting modules, Edwards Signaling Models 116EX-P, 116EXR-P, 116EX-C, 116EXR-C, 116EX-B with 116EX-C, or 116EXR-B with 116EXR-C. Suitable for outdoor use.
Also Listed as Signal Appliance for the Hearing Impaired for Use in Hazardous Locations, synchronous type. Suitable for indoor use only.
Strobe, enclosure and globe/ring subassembly , Model 116DEX, followed by ST, followed by C, followed by -FJ, when assembled with Listed Visual Signal Appliance subassemblies for Use in Hazardous Locations; mounting modules, Edwards Signaling Models 116EX-P, 116EX-C or 116EX-B with 116EX-C. Suitable for outdoor use.
Also Listed as Signal Appliance for the Hearing Impaired for Use in Hazardous Locations. Suitable for indoor use only.
Visual signal appliance subassemblies, mounting modules -
Pendant mount, Cat. Nos. 116EX-P, 116EXR-P.
Ceiling mount, Cat. Nos. 116EX-C, 116EXR-C.
Bracket mount (used in conjunction with ceiling mount for wall mounting arrangement), 116EX-B with 116EX-C or 116EXR-C, 116EXR-B with 116EX-C or 116EXR-C.
Stanchion (angle) mount, 116EX-S, 116EXR-S.
LED strobe light subassemblies , Models 105, 105I followed by -RBA or -RGA, followed by -G1 or -N5 for use with Listed visual signal appliance mounting subassemblies, Cat. No. 105PM, 105BX or 105BM with 105BX. Suitable for outdoor use. Also Listed as a Marine Visual Signal Device (UXUB).
Mounting subassemblies , Cat. Nos. 105PM (pendant mount), 105BX (ceiling mount) and 105BM with 105BX (bracket mount used in conjunction with ceiling mount for wall mounting arrangement).
Class I, Division 2, Groups A, B, C and D.
Cat. Nos. 107DV2#RINH*-N5, 107DV2#RIN*-R5, where * is A, B, C, G, M or R and # is B or C; Cat. No. 107DV2#ST- followed by N5, R5, EK or S1 and # is B or C; Cat. No. 107DDV2#ST*-G1, where * is A, B, C, G, M or R and # is B or C. For indoor or outdoor use, Type 3R and 4. Also Listed as a Marine Visual Signal Device.
Series 107, followed by XBR, followed by B,C,P, followed by M, followed by A, B, W, G, R, M, followed by 24D/120A. For indoor or outdoor use - Type 3R and 4. Also Listed as a Marine Visual Signal Device.
Class I, Groups C and D; Class I, Division 2, Groups A, B, C and D; Class II, Groups E, F and G; Class III.
Adaptabeacon strobe and beacon lights, Cat. Nos. 106EXRINH*-N5, 106EX#RIN*-R5, where * is A, B, C, G, M or R and
# is B or C; Cat. No. 106EX#ST*- followed by N5, R5, EK or S1, where # is P, B or C and * is A, B, C, G, M or R; Cat. No. 106DEX#ST*-G1, 106DEX#STM*-FJ, where # is P, B or C and * is A, B, C, G, M or R. For indoor or outdoor use, Type 3R and 4X. Cat. Nos. ending in -FJ, N5, R5 or S1 are also Listed as a Marine Visual Signal Device.
Adaptabeacon strobe and beacon light enclosure subassembly, Cat. Nos. 116DEXMRINH*-GW, 116DEXMSINH*-GW, 116DEXMSTM*-FJ, 116EXMRINH*-N5, 116EXMSINH*-N5, 116EXMST*-N5 and 116EXST*-EK where * is replaced by the letter A, B, C, G, M or R when assembled with Listed Visual Signal Appliance subassemblies for Use in Hazardous Locations;
mounting modules, Edwards Signaling Models 116EX-P, 116EXR-P, 116EX-C, 116EXR-C, 116EX-B with 116EX-C, or 116EXR-B with 116EXR-C. Type 3R and 4X. Cat. Nos. ending in -GW, -FJ or -N5 are also Listed as a Marine Visual Signal Device.
AdaptaBeacon LED , Model 116EXMLED followed by A, B, W, G or R, followed by Y6.
Class I, Groups C and D; Class II, Groups E, F and G;
Class III.
Adaptabeacon beacon lights, Cat. Nos. 106DEX#RINH*-GW, 106EX#RINH*-G1, where # is P, B or C and * is A, B, C, G, M or R. For indoor or outdoor use, Type 3R and 4X. Also Listed as a Marine Visual Signal Device.
Trademark and/or Tradename: "Edwards Signaling"
Copyright © 2010 Underwriters Laboratories Inc.®
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "Copyright © 2010 Underwriters Laboratories Inc.®"
