RFPW.E184741
Purging and Pressurizing Controls and Accessories for Use in Hazardous Locations |
Purging and Pressurizing Controls and Accessories for Use in Hazardous Locations
Pressure relief vents, Models 335211, 335211-90, 335311, 335311-90 with prefix US.
Purge controls, Types Y, Z, for use in hazardous locations, Models 3200, 3201, 3202, 3203, 3300, 3301, 3302 followed by 00, followed by B, L, P, R, T or U, followed by YZ; all models with prefix US.
Types Y, Z, for use in hazardous locations with explosion-proof pressure switch for Class I, Groups C and D and Class II, Groups E, F and G hazardous locations;
Models 4200, 4201, 4202, 4203, 4300, 4301, 4302 followed by 00, followed by B, L, R, T or U, followed by YZ; all models with prefix US.
Types Y, Z, for use in hazardous locations with explosion proof pressure switch for Class I, Division 1&2, Groups A, B, C, D ; Models 4200, 4201, 4202, 4203, 4300, 4301, 4302 followed by 00, followed b L, R, T, B or U, followed by YA or ZA, followed by B, F, N, S or V, followed by 120VAC or 220VAC, all models with prefix US.
Types X, for use in nonhazardous locations with intrinsically safe circuit extensions for Class I, Groups A, B, C, D, Class II, Groups E, F, G, and Class III hazardous locations when connected accordance with control drawing No. 116-0161; Models US-211120, -211120-220, -211121, -211121-220.
Type X for use in Class I, Groups B, C, D, Class II, Groups E, F, G and Class III Hazardous locations with intrinsically safe circuit extensions for Class I, Groups A, B, C, D, Class II, Groups E, F, G and Class III hazardous locations when connected in accordance with control drawing 116-0161; Models US-214120,
-214120-220, -214121, -214121-220.
Vent Units for use in Class I, Groups A, B, C and D, Class II, Groups E, F and G and Class III hazardous locations when connected in accordance with control drawing 116-0161, Models US-2151 followed by -10, -19, -20, -29, -30,
-40, -49, -50, -59, -60, -69, -70, -79, -80 or -89, 215121 and 215122.
Purge controls, Types Y and Z, for use in Hazardous Locations. Models 11, 1001A, 1001B, 1001C, 1002, 1003, 1004, 1005, 1011, 1012, UC01A, followed by -LPS, may be followed by C1 or C11.
Types Y and Z for use in Hazardous Locations with explosion-proof pressure switch for Class I, Groups A, B, C and D; Class II, Groups E, F and G hazardous locations.
Models 11, 1001A, 1001B, 1001C, 1002, 1003, 1004, 1005, UC01A, followed by -WPSA, may be followed by C1 or C11.
Types Y and Z for use in Hazardous Locations with explosion-proof pressure switch for Class I, Groups C and D and Class II, Groups E, F and G hazardous locations.
Models 11, 1001A, 1001B, 1001C, 1002, 1003, 1004, 1005, UC01A followed by -WPS, may be followed by C1 or C11.
Purge vents, Model EPV, followed by -1, -2, -3, -3.5, -4 or -5, followed by -SA.
Purge Controls, Type X for use in Class I, Groups C and D and Class II, Groups E, F and G Hazardous Locations.
Model 2001, followed by A, B or C, followed by -STD, may be followed by C1 or C11.
Models 2002, 2003, 2004, 2005 followed by -STD, -SA or -FA, may be followed by C1 or C11.
Types Y and Z, for use in Hazardous Locations, without pressure switch provided, for Class I, Groups A, B, C and D; Class II, Groups E, F and G Hazardous Locations.
Models 3003, 3004, followed by -LPS, may be followed by C1 or C11, may be followed by letter "Y"
or "Z", may be followed by -CK, -HM, -LH, -RH, -BM, -PM,
-RM, -TM, -UM, -VM or -WM.
Types Y and Z for use in Hazardous Locations with explosion-proof pressure switch for Class I, Groups A, B, C and D; Class II, Groups E, F and G Hazardous Locations.
Models 3003, 3004, followed by -WPSA, may be followed by C1 or C11, may be followed by letter
"Y" or "Z", may be followed by -CK, -HM, -LH,
-RH, -BM, -OPM, -RM, -TM, -UM, -VM or -WM.
Types Y and Z for use in Hazardous Locations with explosion-proof pressure switch for Class I, Groups C and D; Class II Groups E, F and G Hazardous Locations.
Models 3003, 3004, followed by -WPS, may be followed by C1 or C11, may be followed by letter "Y"
or "Z", may be followed by -CK, -HM, -LH, -RH, -BM, -PM,
-RM, -TM, -UM, -VM or -WM.
Class I, Division 1, Groups A, B, C and D Hazardous Locations.
Purge and pressurization control system, Model 6000, followed by DV, PV, NV, or NP, followed by S2 or S3, followed by UN, followed by WH and XD, followed by AC or DC. Device provides intrinsically safe circuits for use in Class I, Groups A, B, C and D Hazardous Locations when installed per Control Drawing No. 116-013UL-12.
Purge and pressurization control system component kit, Model 6000, followed by DV, PV, NV, or NP, followed by S2 or S3, followed by UN, followed by CK, followed by AC or DC. Device provides intrinsically safe circuits for use in Class I, Groups A, B, C and D Hazardous Locations when installed per Control Drawing No. 116-013UL-12.
Provided with Model EPV6000-xx-xx Relief Vent and/or User Interface 6000-UIC-xx, may be followed by additional numbers or letters, intrinsically safe for use in Class I, Groups A, B, C and D when installed per Control Drawing No. 116-013UL-12.
May be provided with Model 6000-TEMP-01 Temperature Hub, intrinsically safe for use in Class I, Groups A, B, C, D when installed per Control Drawing No. 116-013UL-12.
May be provided with up to three Model 6000-TSEN-01 Temperature Sensors intrinsically safe Class I, Groups A, B, C, D when installed per Control Drawing No. 116-013UL-12.
RFPW.E184741
E184741
RFPW
484121001
LISTING
Active
20120117
20120117
© 2012 UL LLC
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "© 2012 UL LLC".
