UL Online Certifications Directory

Home Quick Guide Contact Us UL.com

GYJT.R10968
Single-point Locks and Latches

Page Bottom

Single-point Locks and Latches


See General Information for Single-point Locks and Latches

PDQ INDUSTRIES INCR10968
2754 CREEK HILL RD
PO BOX 507
LEOLA, PA 17540 USA

Cylindrical type.

Series CL with 1/2 in. latch bolts.

Series SP, SV, with 1/2 in. latch bolts. May be supplied with zinc lever handles.

Series GP, with 1/2 in. latch bolt. Supplied with zinc lever handles.

Series Spirit GT, XGT, SA, ST, with 1/2 in. throw latch bolts. May be supplied with aluminum or zinc lever handles.

Series SV-CQ, SW-PAT with 1/2 in. throw latch bolts.

Series CL-PHL, CL-CQ with a 1/2 in. latch bolt in conjunction with a 1 in throw dead bolt locking mechanism.

Series SR-CQ with a 1/2 in. throw latch bolt for use with fire doors rated up to and including 30 minutes and marked "F-30 min" on the face plate.

Mortise type.

Series MR with 3/4 in. latch bolts. May be supplied with aluminum, brass, bronze or zinc lever handles.

Series Tell Card 200 with 5/8 in. latch bolts. May be supplied with aluminum lever handles.

Tubular type, Series SR with 1/2 in latch bolts.

Series SE with 1/2 in. latch bolt. May be applied with zinc levers.

Series SR-LVT with a 1/2 in. throw latch bolt for use with fire doors rated up to and including 30 minutes and marked "F-30" on the face plate.

Single-point locks or latches of the cylindrical type with 1/2 in. latch bolts, Model SD.

Cylindrical type SX with a 1/2 in. throw latch bolt.


Trademark and/or Tradename:

Last Updated on 2009-05-05

Questions?

Notice of Disclaimer

Page Top

Copyright © 2010 Underwriters Laboratories Inc.®

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "Copyright © 2010 Underwriters Laboratories Inc.®"