UL Online Certifications Directory

AOTX7.S789
Local Alarm Units Certified for Canada

Page Bottom


Local Alarm Units Certified for Canada


See General Information for Local Alarm Units Certified for Canada

HONEYWELL SECURITYS789
SUITE 100
2 CORPORATE CENTER DR
PO BOX 9040
MELVILLE, NY 11747 USA

Models FOCUS 200 PLUS control unit, consisting of Models SAFOC200-1 or SAF200PA or SAF200P1 sub-assembly circuit board and Model COM-UL enclosure or Model 472516 (UNIBANK) enclosure. When mounted outside the protected area a Listed shock must be installed inside the control unit and a rear pry-off tamper on the back of the control unit enclosure. May include accessories Models 472270 Access Control Interface, 148320 Junction Box, 472402A Backup DACT, 427368 SIM Gateway, 248239 PID Gateway, 471715 Printer Interface, 471877 QUADPID, 471883 COPID and 472488 SIM (Sensor Interface Module). The control unit must be used with the Listed Model 472404 or 1451 Hard Wired transformer or the CSA Listed ATC-FROST, Model FTA7518ULC Hard Wired Transformer.

Model FOCUS CADETCN Control Unit, consisting of Models SACADETCN Sub-assembly circuit board and Model COM-UL enclosure or Model 472516 (UNIBANK) enclosure. When mounted outside the protected area a Listed shock sensor must be installed inside the control unit and a rear pry-off tamper on the back of the control unit enclosure. The following accessories are also suitable for use with the FOCUS CADETCN control unit: 472491, 472491A or 472491D AC Communicator module, Models 472270 Access Control Interface, 148320 Junction Box, 472402A Backup DACT, 471715 Printer Interface, and 472488 SIM (Sensor Interface Module). The control unit must be used with the Listed Model 472404 or 1451 Hard Wired transformer or the CSA Listed ATC-FROST, Model FTA7518ULC Hard Wired transformer.

Control units, Models XL4C, XL4CP0 consisting of Model SAXL4C sub-assembly circuit board and Model COM-UL enclosure for use with other separately Listed accessories as indicated in the manufacturer's installation and operating instructions.

Control unit accessory, back up dialer, Model 5140DLM, suitable for use with manufacture's compatible Listed control units as indicated in the installation instructions.

Control unit accessories, 8-zone remote point Module, Models 4208U, 4208SN. Suitable for use with Manufacturer's compatible Listed control units as indicated in the installation instructions.

Accessory - supplemental power supply, Models AD12612 (evaluated for 12 Vdc only).

Control unit accessory, 8-zone remote point Module/Class A interface, Model 4208SNF. Suitable for use with Manufacturer's compatible Listed control units as indicated in the installation instructions.

Control unit accessories, Model 4297, Polling Loop extender modules.

Model Vista View-100 for use with this manufacturer's control units that support 4204 Relay Module connections via the keypad lines. Suitable for supplemental use only.

Models 7845C, 7845CZ, 7845CV2, 7845CF fire kit, 7845CZF fire kit cellular control channel transceiver. May be used for premise protection when remote monitoring is required.

Model 5817CB Wireless Commercial/Household Transmitter. Supplemental use only. Suitable for use with other separately Listed devices and accessories as indicated by the manufacturer's installation instructions. Intended for indoor applications only.

Model 5881ENHC household and commercial RF receiver. Suitable for supplemental use only. Suitable for use with other separately Listed devices and equipment as indicated by the manufacturer's installation instructions.

Models 6150 , 6150V, 6150V ADT, 6160, 6160V, 6160VADT, remote keypads to be employed with manufacturer's compatible Listed control unit systems as indicated in the installation Instructions.

Control unit accessory , Video Controller, Model Optiflex. Intended for use with Listee's control units as described in the installation instructions, and is suitable for supplemental use only.

Control unit accessory, Polling Loop Short Isolator Module, Model VPLEX-VSI. For use with Ademco control panels supporting 2-wire polling loop devices.

Control unit accessories, Models 6139, 6139R, 6150, 6150ADT, 6150V, 6150VADT, 6160, 6160CR, 6160V, 6160VADT, 6160VBAY, 6164, 6164SP, CP150KP, FA560VKP, FA570KP emote keypads. "Model numbers may include a prefix or suffix consisting of number (s) and/or letter (s)". To be employed with the manufacturer's Listed control units as indicated in the instillation instructions.

Control unit accessories, Models 6270, 6270ADT, 6270PL2, FA700KP touch screen keypads. To be employed with the manufacturer's Listed control units as indicated in the installation instructions.

Control unit enclosures, Models COM-UL and 472516 (Unibank enclosure).

Control unit sub-assemblies, Models 472491, 472491A and 472491D AC Communicator Modules. Must be mounted inside the control unit. Suitable for use with the FOCUS 200 PLUS or FOCUS CADETCN Control Unit.

Control unit sub-assembly, Model 7800ADT Long Range Radio RF Gateway. Suitable for use with Models FOCUS 200 PLUS and FOCUS CADETCN control units.

Control unit accessories, Internet communicators, Models 7845i-ent, 7845i-entF. For use with the manufacturers listed Compatible Control Units as specified in the Installation Instructions.

Last Updated on 2009-12-02

Questions?

Notice of Disclaimer

Page Top

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "Copyright © 2010 Underwriters Laboratories Inc.®"